Bamboo furniture board and bamboo skin use methods and precautions

One using bamboo furniture board method, note:
1, before use, please check whether the bamboo furniture board structure is complete.
2, if the single-layer bamboo furniture board and other materials, composite sheet, please clean, flat and bamboo furniture board composite substrate material to ensure that there is no impurities, no greasy and so on. Substrate surface must be completely flat, can not have bumps. If the substrate is a wood material, make sure that the moisture content of the material of the board is close to that of the bamboo furniture board, so that it can avoid the expansion of the substrate after the composite with the furniture plate or the loss of the water.
3, the bamboo furniture board can be used in the case of the appropriate adhesive with the bamboo material supplier of different materials composite, please carefully select the adhesive, to the adhesive dealer to learn more about the variety of adhesive, performance and Instructions.

4, evenly brushing adhesive to ensure that the adhesive coated surface covering the entire composite surface, can not leave blank.

5, in the adhesive before curing the bamboo furniture board and the substrate compound, with the pressure plate surface pressure, the excess adhesive and the inside of the bubble out.
6, if the whole multi-layer bamboo furniture board directly as furniture panel and other furniture accessories combination, please grasp the width of bamboo furniture board size, too wide plate prone to deformation of the arch, so for a large area of the whole board Application We recommend the use of vertical and horizontal cross-structure bamboo furniture board.
7, due to the characteristics of bamboo straight fiber, bamboo furniture board in the cut, drilling operation, we must use fast, serrated and fine saws and fast electric drill, can not use large sawtooth saw and directly Nails nail on bamboo furniture board.
Two use bamboo paste panel / bamboo skin method, note:
1, before use, please check whether the panel / bamboo skin is complete, non-woven backing off or blistering.
2, please clean, flat and plywood / bamboo skin composite substrate material to ensure that there is no impurities, no greasy and so on. Substrate surface must be completely flat, can not have bumps. If the substrate is a wood material, make sure that the moisture content of the material is close to the moisture content of the bamboo panel / bamboo 3, the bamboo plywood / bamboo skin can be used in the case of the appropriate adhesive with a variety of different materials, please carefully select the adhesive, to the adhesive dealer to understand the variety of adhesive, performance and use method.
4, evenly brushing adhesive to ensure that the adhesive coated surface covering the entire composite surface, can not leave blank.
5, in the adhesive before curing the bamboo panel / bamboo skin with the substrate compound, with soft roll, small wood scraper and other tools pressure flat, the excess adhesive and the inside of the bubble out.